Msi Afterburner

Msi Afterburner is designed to manage Nvidia and AMD graphics cards. Its main features are as follows: controlling the frequency of the graphics processor and memory, changing the voltage, adjusting the coolers of the video card, taking data on the state of the video card from the sensors and displaying them on the screen.

The new MSI Afterburner 4.6.4 Beta 2 has been a lot of work and brings support towards the latest graphics cards, some mobile support as well as new CPU support. We do hope it was worth the wait. Welcome to the MSI USA website. MSI designs and creates Mainboard, AIO, Graphics card, Notebook, Netbook, Tablet PC, Consumer electronics, Communication, Barebone.

Also a program initially focused ongamers, allows you to record video and take screenshots. Software is indispensable for the miner, with its help it is easy to optimize video cards for long work with minimal wear and power consumption or disperse them to get maximum returns in a short time.

The program allows you to manage a group of video cards, and save up to five different profiles with settings. Software is free.

In this review, we will tell you where it is best to download, and how to properly configure the MSI Afterburner program for cryptocurrency mining.

Download from the official site

The name afterburner translates as 'afterburnercamera'. With it, you can squeeze maximum productivity out of your video cards. In order not to catch any attack on your PC, you need to download the msi afterburner from the official developers site https://ru.msi.com/page/afterburner.

There are three versions of the program:

Msi afterburner for Windows
Android version for configuring a video card using a smartphone.
MSI Afterburner Remote Server.

If you have a farm of several graphicadapters then msi afterburner configuration will be performed on the computer. Download the archive, unzip it to a folder convenient for you, and proceed with installing the program.

Install MSI Afterburner

Open the folder with the latest version of the utility, onthe moment of the review is 4.6.2, and click on the Setup.exe icon to launch the installation file. You will be prompted to select the installer components. Configuring msi afterburner for mining does not depend on RivaTuner Statistics Server.

This is an additional utility that providessupport for frame rate monitoring, real-time video capture and statistics on the use of 3D acceleration. It is only needed for gamers and can negatively affect the performance of the rig. Uncheck the box next to RivaTuner and click 'Next.' Wait for the installation to complete and run msi af.

How to overclock a MSI Afterburner graphics card?

Using the AF application, you can adjust:

The memory and core frequencies.
Cooler rotation speed.
Power consumption limit.
Core voltage.

After installation, open the program as administrator, and make sure that it correctly displays all the video cards in Riga.

By default, the panel will display the parameters of the first graphics accelerator. If all the cards are the same model, you can not configure msi afterburner overclocking for each of them individually.

The settings of the first map will be applied toto the rest. But, if you want to separately set the frequencies of each device, click the button with the gear logo on the left under the Fan Speed dial to open the settings menu, and uncheck the “Synchronize settings of identical GPs'.

In the same window, unlock control is availablevoltage and expansion of acceleration parameters. In order to avoid malfunctions, the latter option is not recommended when setting up mining farms assembled from radically different models of video cards. Now let's proceed to the settings of msi afterburner for mining. We start with Core Clock and Memory Clock.

Important! Parameters need to be changed gradually no morethan 5-10 points. A sharp change in the frequency of the memory and the kernel will lead to a freeze, a reboot of the driver crash, and, possibly, to a breakdown of the video card itself.

The easiest way is to pre-searchparameters recommended for this GP model on thematic forums and set them before launch. If the result does not suit you, or you do not find the information you need, select the frequencies yourself. Just keep in mind that memory from different manufacturers, such as Hynix or Samsung, can be installed on the same model, and then the overclocking options will be slightly different.

Increase memory frequency

This indicator is set on the Memory Clock scale. There are two ways to adjust.

Move the slider manually using the mouse.
Click on the number at the end of the scale and writedesired parameter using the keyboard. Then press Enter and apply the set value by clicking the checkmark button in the AF interface. It is located on the right under the cooler settings scale.

The core frequency is adjusted in the same way. And one more nuance. When setting the memory and core frequencies for AMD video cards, you simply write the desired values on each scale, for example 2100, 1100. Nvidia’s situation is slightly different, here you add (or decrease) the necessary number of steps to the factory parameters, e.g. +150, +30.

But, it is not enough to find the maximum values at which the farm will work stably. Profit depends on energy consumption, and it must be reduced.

Reduce power consumption

AMD Rx 5700XT graphics card according toWhatToMine calculator consumes 140W in mining, but by setting the core voltage to 860mV, you can reduce consumption to 115W. To do this, unlock the parameter control core voltage in the settings and gradually reduce the voltage, observing the stability of the device.

This option may not be available on someGP models, in this case, you need to use alternative methods. For example, modify Bios, or write the necessary parameters in the batch file of the miner program. This feature is provided by the latest versions of Claymore and Phoenix.

On the left, next to the Core Clock scale, there is a button for regulating voltage parameters depending on the core frequency. In the jargon of miners, this option is called “kurva”.

Important! The graphic adapter does notshould work under load, and the parameters of the core frequency must be set to zero. After that, click on the shortcut in the form of a step and a window with two curves will open in front of you.

Set the ratio of Core voltage to Core Clock, close the window and save the settings. After that, put on msi af the working value of the core frequency and start setting up the cooler.

We optimize the cooling system

Scale power limit designed to set the limit of consumedpower. The default is 0 (100%). If the video card is overheating, try decreasing the limit, for example, to -20, and if it gives little stock or the core frequency constantly skips, add a limit, for example, to +20. If the card works at a low voltage, an increase in the power limit will not affect energy consumption, but a decrease can lead to a loss of hashrate and a decrease in the number of shares.

Important! By changing the limit of power consumption, you changethe value of the maximum allowable temperature of the GP. Of course, it cannot be higher than the threshold specified in Bios, but this is a rather high value. And, if, for example, your fan fails, the card will overheat. To allow this, write down the –tmax and –tstop parameters in the miner’s batch file, and if the utility does not have such options, follow the rig parameters using the msi afterburner mobile application.

Now go to the item msi afterburnercooler setting. The fan speed is set on the Fan Speed scale. By default, the driver automatically adjusts the speed. You can set the cooler speed in manual mode.

Click the Auto button at the end of the scale.
Set the desired rotation speed.
Save the settings.

You can set the automatic operation mode in the “Cooler” tab of the settings menu.

Check the box next to 'Set software custom auto mode.'
Adjust the cooler speed curve in relation to the GP temperature by moving the control markers.

Keep in mind that the line can go straight or alltime is up, but you cannot set such a mode when the speed will drop with increasing temperature. When finished, click “Apply” and close the settings window.

Autostart at PC startup

In order for the afterburner to start automatically with the operating system, and immediately display the specified parameters, you must:

Upon completion of the settings, activate StartUp in the lower left corner of the interface.
Open the settings menu and put a tick in front of the option “Run with Windows”.

At the bottom right are the profile slots. Press the buttonSave', After which all five slots will flash, andselect the cell with the desired number. Logically, right away, they select 1, then 2, and so on. Thus, you can save 5 different configurations, which is very convenient if you often switch mining algorithms.

Advanced MSI Settings

The advanced settings menu contains 5 tabs.

The main ones.
Cooler.
Monitoring
Profiles
Interface.

We have already introduced you to the first two points. The monitoring tab is used to configure the period of polling sensors and column graphs. In the profiles window, you can set hotkeys for activating saved parameters. The last tab will help you change the look of the program.

Conclusion

There are others, no less effective andconvenient graphics card overclocking applications for mining, but the afterburner came out first, so many just got used to it. This application has a beautiful and convenient graphical shell and developers regularly release new versions. The msi afterburner program is recommended for miners digging in Windows. Good luck to everyone!

Rate the publication

Msi Afterburner Download Windows 10

Read this:

MSI Afterburner is a completely free overclocking tool that can also record PC gameplay! We found that this recording software had extremely minimal impact on game performance, even when recording at the highest quality settings. This recording software is ideal for those of us who aren’t running supercomputers, but still want to record high-quality footage. We rank MSI Afterburner as one of the best game recorders on the market. Honestly, we can’t believe that it is completely free!

Hardware assessment

This tutorial focuses on modifying the video, audio, and encoding settings to produce the best video output without impacting game performance.

There are minimum hardware requirements you should have when playing and recording resource intensive games in 2017:

Msi Afterburner Overclocking

8gb ram
i7 CPU
Game boots on SSD
Recorded footage stored on a SSD or HDD (SSD is preferred)
GTX 660

At a bare minimum, I highly recommend upgrading to an SSD if you are still running your game off of a standard hard drive.

Ideally, you should store footage on a SSD drive to reduce instances of recorded footage appearing laggy, broken, or having skipped frames. This is likely due to a problem writing the recorded footage to disk on a standard HDD. You’ll eliminate the chances of this happening by using a SSD.

Msi Afterburner

Unfortunately, the file size of MSI recorded video files are pretty big and will quickly fill up a small SSD.

Msi Afterburner Oc Scanner

Luckily, 500gb SSDs are incredibly affordable in 2017, so you could also use one to store your game footage.

Solid state drives offer a fast read/write speed which is essential for recording and playing games. A faster read/write speed means that your game boots up quicker and you’ll load into the map quicker than you would have on a standard hard drive. Encoding and writing files is also much faster compared to a normal hard drive.

You should always record with two hard drives: one to run your game off of and the other to store the recorded footage.

Do not set your file output path to the same hard drive you run your game off of!

If you are close to these minimum requirements, you should still try these settings. Remember, OBS is free!

The Best MSI Afterburner Recording Settings

We found that it is easy to record 1080p footage @60fps with high in-game settings. The frame-drop is almost unnoticeable. The downside is that the file sizes are huge for lossless quality footage, but this is normal. Our settings focus on optimizing audio and video quality while minimizing frame-loss and reducing output filesize. These settings look amazing on Youtube!

Get started by opening up your MSI Afterburner settings, located here:

Video Settings

Settings>Video Capture

- Video Capture Hotkey: We chose a key combination for the hotkey to reduce keybinding conflicts
- Video prerecord: Pushing the hotkey associated with this essentially records “back in time” based on the buffer limit you designate. This means that you don’t need to record constantly! In this case, pressing the hotkey combination saves a 10 minute clip. Setting the buffer limit file size to 0 means you are not limiting the output filesize for the prerecording. This feature is similar to Shadowmode for ShadowPlay and is one of the coolest features of MSI Afterburner.
- Video format: The compression format for the recorded footage. We use MJPG Compression.
- Container Format: The format of the saved footage. We are saving in the .avi format.

Quality: The quality of the output video. We use 80% quality to reduce the file size (the difference in quality isn’t noticeable)

Msi Afterburner Small On Screen

Frame size: Full frame means it will record at the full frame rate you specifiy. In this case, we designate a 60fps frame rate, so it will record at 60fps. However, if we set the frame size to half frame, it would record at 30fps instead. Recording at a lower framerate will reduce file size and increase performance.
Framerate limit: This is used to limit the framerate during video capture, which can result in smoother video playback due to less frame rate fluctuation. We didn’t find it neccessary to use this setting.
Multithreaded optimization: Usage depends on your processor setup (if you have multiple processors). Setting this to automatic allows MSI to detect the best settings for you. We set this to automatic.

Audio Settings

Found in Settings>Video Capture (scroll down)

- Audio Sources: Allows you to set two audio sources to record. Set this to your microphone and speaker/headphones. You could also use audio channels setup by an audio splitter.
- Push-to-talk: Setting a push-to-talk hotkey means that your voice will only be recorded when pressing down the hotkey. This doesn’t mean you will need to use the same Push-to-talk hotkey on Teamspeak or Skype. This is useful if you don’t use a push-to-talk hotkey with your VoIP, but don’t want to record your microphone all the time.
- Downmix multichannel audio to stereo: Used to convert your audio stream to stereo. This can improve performance and compatibility with editing software. We recommend using this.
- Mix multiple audio tracks: If you are recording two audio sources, this setting will split the sources into two seperately editable audio streams. If you don’t use this setting audio sources will appear in the same audio channel, so they are not independently editable. We recommend using multi-track audio recording so you can easily adjust and edit your audio sources when editing the footage.

Overlay Settings

Found in Settings>On-Screen Display

- Toggle On-Screen Display: Turn the recording indicator/FPS counter on/off. We found that this was the only display hotkey needed.
- Show On-Screen Display on captured screenshots and video: Turning this on will make the recording indicator/fps counter overlay visible in your recorded footage. This is useful if you want to show people the framerate you were getting while playing a game. Great for debugging and showing lag-issues.

Comments are closed.